Builders Edge 130120005089 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Builders Edge 130120005089. Builders Edge 130120005089 Installation Guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Jumbo Mount Master Utility Block
Installation Instructions
-To be installed prior to siding
Step 1
Remove the trim ring from the Block Assembly.
See Figure 1 below..
Figure 1
Step 3
Place the Block over the desired application with the
words "TOP" in the correct orientation. Be sure
to place tape or sealant between the Block and the
house. Attach the Block using an 8d nail or equivalent
with a minimum of ten attachments (eight attachments
around the outside of the part and two attachments on
the inside of the electrical box). See Figure 2
below for proper fastener locations.
Step 4
Cut the siding around the Block. Install the siding
according to the manufacturer's installation instructions.
See Figure 3 below.
Step 5
Install the trim ring by locking it into place.
See Figures 4A and 4B below.
Figure 4A
Figure 4B
Step 6
Mount the fixture to the Mount Master Utility Block.
Be sure that all electrical product gaskets have the
proper sealant.
Figure 3
Step 2
Determine where wires will come through wall and
remove the corresponding knockout in the black
electrical box. Score the perimeter of the round knock-
outs from the inside of the box with a utility knife.
Knock out from the back of the box using a screw
driver as a chisel. Align the hole with the wires.
-Maximum 20 lb. light fixture
I-0056
PAPC9309
01-03-06
U.L. Listed
Figure 2
Centered
Offset
TOP
TOP
TOP
TOP
Part No. Offset: PAFMHULOxxx
Centered: PAFMHULCxxx
PAFMJULCxxx
Vue de la page 0
1

Résumé du contenu

Page 1 - U.L. Listed

Jumbo Mount Master Utility BlockInstallation Instructions-To be installed prior to sidingStep 1 Remove the trim ring from the Block Assembly. See Fi

Commentaires sur ces manuels

Pas de commentaire